• Address
  • Phone
  • Email
  • Timing
  • Social

Test Paper

Driving School > Test Paper
 

AZ Practice Test Quiz 03

 

1.  Which of these is not a part of a disc air brake system?

  • A brake pushrod
  • A brake rotor
  • A brake caliper
  • A brake drum

2.  How are wedge brake systems different to other drum brake systems?

  • More of them per wheel
  • Larger brake shoes
  • No exposed linkage
  • Made of different materials

3.  If a vehicle is found to be noncompliant with the safe operation requirements in the Ontario Highway Traffic Act, which of these sanctions may be applied?

  • Fines for the owning company
  • Any/all of them
  • Fines for the driver
  • Impoundment of vehicle

4.  Which of these is essential to ensure that full braking force is available?

  • Drivers with strong legs
  • Good road surfaces
  • Large capacity air tanks
  • Proper brake adjustment

5.  Wedge brake systems are designed to be...?

  • Self operating
  • Self sealing
  • Self lubricating
  • Self adjusting

6.  What does the 'S' shape on the one end of the camshaft operate in the 'S' cam system?

  • The push rod
  • The brake drum
  • The brake shoes
  • The slack adjuster

7.  Brakes that are out of adjustment can be detected by...?

  • Any of these methods
  • A reliable inspection method
  • Visual checks by the driver
  • Testing on the road

8.  Which of these parts would you not find on a wedge air brake system?

  • Spiders
  • Pushrods
  • Brake shoes
  • Brake drums

9.  What does an ABS system do?

  • Shortens stopping distances
  • All of these things
  • Increases brake power
  • Prevents wheel lock

10.  Brake fade is caused by...?

  • Components heating
  • Hard acceleration
  • Cold weather
  • Wet conditions

11.  The best way to reduce harsh brake use is to...?

  • Use your horn effectively
  • The exact in and out of traffic
  • Drive right on the speed limit
  • Leave safe following distances

12.  Which of these will not be a factor on how your vehicle's brakes work?

  • The weight of your vehicle
  • Your speed
  • Your weight
  • Brake adjustment

13.  When making an inspection of an air brake system, drivers should wear...?

  • Steel toed shoes or boots
  • All of these things
  • Safety glasses
  • Bump caps

14.  Inspections of air brake systems should begin by checking...?

  • The air compressor
  • The air lines
  • The brake pedal
  • The foundation brake components

15.  Which of these significantly decreases the brake force produced at the wheel?

  • Overextension of the brake chamber pushrod
  • High pressure in the compressed air tanks
  • Damp road conditions
  • Cold air temperatures

16.  A vehicle should have wheel chocks or blocks securing it in place during inspection if...?

  • The driver is not within 50 m of the vehicle
  • The driver leaves the cab without applying the parking brake
  • Any of these apply
  • The driver leaves the cab under any circumstances

17.  You will place abnormal demand on your brake system if you...?

  • Exceed the speed limit of the road you are on
  • Drive too much on long highways
  • Exceed the weight capacity of your vehicle
  • Drive too much in urban traffic

18.  When towing a trailer, you will usually be able to tell if it is employing ABS by...?

  • Checking for lights in your mirror
  • Checking for lights on your dashboard
  • Listening for audible warnings
  • The way the handling feels

19.  Which of these circumstances is not likely to increase the operating temperature of the brakes?

  • Driving in stop and go traffic
  • Driving down steep hills
  • Making emergency stops
  • Driving on expressways

20.  The Ontario Highway Traffic Act requires that vehicles with air brakes must be checked at least once...?

  • Every two days
  • A week
  • A day
  • A month

21.  Which of these parts would you find on a disk air brake system?

  • Spiders
  • Calipers
  • Backing plates
  • Brake shoes

22.  In the 'S' cam brake system, what does a brake spider hold?

  • The camshaft
  • The return spring
  • The brake drum
  • The brake shoes

23.  When making any inspection, drivers should be on guard for...?

  • Compressed air exhausts
  • Movement of the vehicle
  • All of these things
  • Leaving vehicle parts

24.  In extreme cases, brake fade can lead to...?

  • Engine seizure
  • Tire blowout
  • Inability to stop
  • Steering failure

25.  When conducting an inspection of an air brake system, the vehicle should be parked...?

  • On a level surface
  • Facing downhill
  • Any of these
  • Facing uphill

26.  Excessive brake temperature can be avoided in vehicles which are fitted with...?

  • Auxiliary brakes
  • Any of these
  • Retarders
  • Engine brakes

27.  When you double your speed, the demand on your brakes to come to a stop will increase by how much?

  • Five times
  • Two times
  • Four times
  • Three times

28.  For safety, the full capacity of the brake system must be available...?

  • When traveling in urban traffic
  • At all times
  • When traveling at high speed
  • When going downhill

29.  If a vehicle fails to comply with the specific requirements for the safe operation of commercial motor vehicles as set out in the Ontario Highway Traffic Act, the driver, operator and/or owner of the vehicle must...?

  • Keep it off the road until it is fixed
  • In sure it is fixed within a month of the defect being notified
  • Only use it during daylight hours
  • Not use it on high-speed highways

30.  Which of these parts would you not find on an “S” cam air brake system?

  • Slack adjusters
  • Camshaft
  • Rollers
  • Rotors